GAUGE SELECTION

70 vs. 80 gauge stretch film: choose by pallet performance, not habit.

Buyers often ask whether 70 gauge or 80 gauge stretch film is better. The honest answer depends on the load, wrapping method and accepted result. Gauge is a useful starting point, but it is not the full measure of stretch wrap quality.

Published by BINGOPLAS · Last updated September 14, 2026 · Product specifications, availability and delivery terms are confirmed in the written quote.

PRACTICAL COMPARISON

Use gauge as one input, then test the whole wrap system.

An 80 gauge film may be appropriate for heavier, sharper or less stable loads. A 70 gauge film may work well for lighter uniform loads, especially when resin quality and wrapping technique are controlled. The best comparison is cost per accepted pallet.

GaugeCommon buying note

70 gaugeOften considered when buyers want to reduce applied film weight on stable pallets.

80 gaugeA familiar standard reference for many hand wrap and general pallet wrap programs.

Downgauged filmMay perform like a heavier film when structure and resin are designed for stretch performance.

TRIAL METHOD

What to measure before changing gauge.

A good film trial should not stop at "the roll feels okay." Measure actual pallets wrapped, roll changes, film breaks, load movement and operator feedback. If the lower-gauge film causes extra wraps or damage, the lower roll price is not a real saving.

Open gauge guide

Load weight

Heavier loads usually need more containment force, not just a familiar gauge number.

Sharp edges

Boxes, trays and irregular products can create puncture risk during handling.

Wrap method

Hand film, machine film and pre-stretched film behave differently at the same nominal gauge.

Accepted pallet cost

Use pallets delivered safely, not roll price alone, as the final comparison.

FREQUENTLY ASKED QUESTIONS

70 and 80 gauge stretch film questions.

Is 80 gauge stretch film stronger than 70 gauge?

All else equal, 80 gauge is thicker than 70 gauge, but real performance also depends on resin, film structure, stretch level, cling, puncture resistance and the way the pallet is wrapped.

Can I replace 80 gauge stretch film with 70 gauge?

Possibly, but only after a controlled pallet trial. Measure film breaks, applied film weight, pallets per roll, load movement and rejected pallets before approving a down-gauge change.

Which gauge works better for 1500 ft hand stretch wrap?

Many buyers use 70 or 80 gauge hand film in 1500 ft roll formats. The right choice depends on pallet weight, edges, operator technique and how much containment the load needs.

RELATED BINGOPLAS PAGES

Connect gauge selection to product format.

Compare hand stretch film, machine stretch film, pre-stretched film, sample trial checklist, and the 1500 ft stretch wrap guide.